moon base paper model!!!!!!!!

gary pilsworth is going to be releasing the moon base paper model soon, i guess within 2 weeks, he has the intial drawing up, and after that possibly a shado pistol!
just thought i would let you know!
jim

by the way, the struts and sheilds on the ufo could be directional tachyon capacetors in series, to increase the potential of the t-bursts and then a reverse flux could occur from the targeted object in course, and actually pull the ship along, it would spin according to the rate of the tachyon reverse pull on it from the locked in target, like steering a car while focused on a long range object, compensation would have to be constant for keeping the line in pull, thus the spinning sheilds.
just a thought.

i forgot to mention that the tachyon stream would build up a syndrome as soon as it locked in on it's target,
 and that would create the tug or pull that the ship would need to move, the rotating sheilds spinning around would sequence the catch of the pull and keep it on course, or it would be flung off course.
 so the constant switching from sheild to sheild would be needed.
the u-tonium, or cheap grade plutonium cap on top and the anti- matter colliders on the bottom of the UFO would create the tachyons needed for the syndrome stream.
of course there is no known way here on earth to shoot a tachyon stream out to the other planets or asteroids to grab onto and pull the ship along, but as soon as the equipment is designed and created, it would be possible to do.
jim

--- On Mon, 4/4/11, [hidden email] <[hidden email]> wrote:


From: [hidden email] <[hidden email]>
Subject: [SHADO] moon base paper model!!!!!!!!
To: [hidden email]
Date: Monday, April 4, 2011, 2:30 PM


 



gary pilsworth is going to be releasing the moon base paper model soon, i guess within 2 weeks, he has the intial drawing up, and after that possibly a shado pistol!
just thought i would let you know!
jim

by the way, the struts and sheilds on the ufo could be directional tachyon capacetors in series, to increase the potential of the t-bursts and then a reverse flux could occur from the targeted object in course, and actually pull the ship along, it would spin according to the rate of the tachyon reverse pull on it from the locked in target, like steering a car while focused on a long range object, compensation would have to be constant for keeping the line in pull, thus the spinning sheilds.
just a thought.








[Non-text portions of this message have been removed]

My idea about the spin on a UFO was because the ship is moving so fast the G
force of the speed would nail you against a wall.  With with the UFO spinning
the G force is divided equally in all directions giving you the ability to move
around the ship.  If the speed increase so does the spin rate to counter it.
 James K.




________________________________
From: "[hidden email]" <[hidden email]>
To: [hidden email]
Sent: Mon, April 4, 2011 4:30:00 PM
Subject: [SHADO] moon base paper model!!!!!!!!

 
gary pilsworth is going to be releasing the moon base paper model soon, i guess
within 2 weeks, he has the intial drawing up, and after that possibly a shado
pistol!
just thought i would let you know!
jim

by the way, the struts and sheilds on the ufo could be directional tachyon
capacetors in series, to increase the potential of the t-bursts and then a
reverse flux could occur from the targeted object in course, and actually pull
the ship along, it would spin according to the rate of the tachyon reverse pull
on it from the locked in target, like steering a car while focused on a long
range object, compensation would have to be constant for keeping the line in
pull, thus the spinning sheilds.
just a thought.




[Non-text portions of this message have been removed]

Hi,
 
blimey, but I always thought that the aliens must be capable of antigravity devices compensating for any G-force, given the fact that they flew exceedingly well in earth atmosphere without any visible propulsion device and a not exactly aerodynamic form.
 
Cheers
 
An
 


--- Billy Killian <[hidden email]> schrieb am Di, 5.4.2011:


Von: Billy Killian <[hidden email]>
Betreff: Re: [SHADO] moon base paper model!!!!!!!!
An: [hidden email]
Datum: Dienstag, 5. April, 2011 03:08 Uhr


 



My idea about the spin on a UFO was because the ship is moving so fast the G
force of the speed would nail you against a wall.  With with the UFO spinning
the G force is divided equally in all directions giving you the ability to move
around the ship.  If the speed increase so does the spin rate to counter it.
 James K.

________________________________
From: "[hidden email]" <[hidden email]>
To: [hidden email]
Sent: Mon, April 4, 2011 4:30:00 PM
Subject: [SHADO] moon base paper model!!!!!!!!

 
gary pilsworth is going to be releasing the moon base paper model soon, i guess
within 2 weeks, he has the intial drawing up, and after that possibly a shado
pistol!
just thought i would let you know!
jim

by the way, the struts and sheilds on the ufo could be directional tachyon
capacetors in series, to increase the potential of the t-bursts and then a
reverse flux could occur from the targeted object in course, and actually pull
the ship along, it would spin according to the rate of the tachyon reverse pull
on it from the locked in target, like steering a car while focused on a long
range object, compensation would have to be constant for keeping the line in
pull, thus the spinning sheilds.
just a thought.

[Non-text portions of this message have been removed]








[Non-text portions of this message have been removed]

i just thought that the inside cabin free wheeled while it spun, and was mechanized to line up the door hatch after landing. im not sure why gary designed the UFO that way but it sure is fun trying to figure out a way that it works.
by the way a play house ufo about 6 ft tall and 9 ft wide is possible, and feasably cheap, fiber glass domes could be made at the local surf board shop, and those foam panels could be painted and glues. and maybe an upside down trash can for the cabin, a bucket, also upside down with a green yard light in it for the top?
jim 

--- On Tue, 4/5/11, An Delendir <[hidden email]> wrote:


From: An Delendir <[hidden email]>
Subject: Re: [SHADO] moon base paper model!!!!!!!!
To: [hidden email]
Date: Tuesday, April 5, 2011, 12:46 AM


 



Hi,
 
blimey, but I always thought that the aliens must be capable of antigravity devices compensating for any G-force, given the fact that they flew exceedingly well in earth atmosphere without any visible propulsion device and a not exactly aerodynamic form.
 
Cheers
 
An
 

--- Billy Killian <[hidden email]> schrieb am Di, 5.4.2011:

Von: Billy Killian <[hidden email]>
Betreff: Re: [SHADO] moon base paper model!!!!!!!!
An: [hidden email]
Datum: Dienstag, 5. April, 2011 03:08 Uhr

 

My idea about the spin on a UFO was because the ship is moving so fast the G
force of the speed would nail you against a wall.  With with the UFO spinning
the G force is divided equally in all directions giving you the ability to move
around the ship.  If the speed increase so does the spin rate to counter it.
 James K.

________________________________
From: "[hidden email]" <[hidden email]>
To: [hidden email]
Sent: Mon, April 4, 2011 4:30:00 PM
Subject: [SHADO] moon base paper model!!!!!!!!

 
gary pilsworth is going to be releasing the moon base paper model soon, i guess
within 2 weeks, he has the intial drawing up, and after that possibly a shado
pistol!
just thought i would let you know!
jim

by the way, the struts and sheilds on the ufo could be directional tachyon
capacetors in series, to increase the potential of the t-bursts and then a
reverse flux could occur from the targeted object in course, and actually pull
the ship along, it would spin according to the rate of the tachyon reverse pull
on it from the locked in target, like steering a car while focused on a long
range object, compensation would have to be constant for keeping the line in
pull, thus the spinning sheilds.
just a thought.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]








[Non-text portions of this message have been removed]